HPE0-J58 Actual Questions Answers Pass With Real HPE0-J58 Exam Dumps
HPE0-J58 Dumps Prepare Your Exam With 118 Questions
HP HPE0-J58 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 65
A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover. Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?
- A. Serviceguard Metrocluster
- B. Peer Persistence
- C. Site Recovery Manager
- D. Cluster Extension (CLX)
Answer: D
NEW QUESTION 66
A customer wants to implement a disaster recovery plan for their current HPE 3PAR array datA. They have obtained a remote site 10km away their primary site. They have performed bandwidth testing, and have confirmed their RTT is approximately 100ms. The customer needs to provide data replication to assure the best data availability they can achieve. Which synchronization method meets their needs?
- A. Asynchronous Periodic Remote Copy
- B. Synchronous Remote Copy
- C. Peer Persistence
- D. Asynchronous Streaming
Answer: A
NEW QUESTION 67
A customer needs to a multi-site environment where the entire inter-site transmission will be encrypted. Which products support this feature without additional licenses? (Select two.)
- A. HPE Nimble arrays with SmartReplicate (remote replication)
- B. HPE StoreOnce hardware appliance
- C. HPE StoreOnce VSA
- D. any B-series 16Gb SAN Switch
- E. HPE 3PAR
Answer: B,D
NEW QUESTION 68
A customer has a primary site with an HPE Nimble Storage array and a secondary site with another HPE Nimble Storage array. The customer had a planned power outage at their primary site, and now needs to switch back to the primary array.
Place the steps into the order they must be performed to switch back the primary array.
Answer:
Explanation:
NEW QUESTION 69
You are starting an assessment to design a new multi-storage environment for a customer. You have collected data on all the current arrays using SAF collector.
What should be the next step in your design process?
- A. Send the .zip file to [email protected]
- B. Open the .zip file with NinjaSTARS
- C. Import the .zip file into OCA
- D. Upload the .zip file to the SAF Portal
Answer: D
NEW QUESTION 70
A customer needs to replicate multiple HPE 3PAR source arrays to a single HPE 3PAR target array at a Disaster Recovery sue.
What is required to support a 31 fan-in for Remote Copy?
- A. a 4-node HPE 3PAR array
- B. HPE SN4000B SAN Extension Switches
- C. 4-poit 16 Go Fibre Channel Adapters
- D. HPE 3PAR 2OO00
Answer: D
NEW QUESTION 71
A customer has two sites. The link between sites is Fibre Channel, and the distance between sites is less than
1km. The link latencies are within HPE recommended tolerances.
The customer asks you to design a Peer Persistent solution using HPE servers running physical Windows
2016 servers and HPE 3PAR storage.
What are characteristics of the Quorum Witness? (Select two.)
- A. A physical implementation of the Peer Persistence Quorum Witness is required on a third site
- B. The Quorum Witness initiates the fail-over, passing control to the standby array
- C. A Peer Persistence Quorum Witness is required for normal HPE 3PAR Peer Persistence operation
- D. Quorum Witness becomes relevant only during 3PAR Peer Persistence failover
- E. A virtual implementation of the Peer Persistence Quorum Witness is required on a third site
Answer: C,E
NEW QUESTION 72
A customer configured the RCIP ports on two HPE 3PAR arrays, and cabled them to the respective networks.
The remote copy links between the arrays are established, and the remote copy service Is started successfully.
The customer wants to ensure they have a latency lower than 5 ms and can support a throughput of 8 Gb/s.
What should you do to verify the links are correctly sized to support the replication bandwidth required?
- A. Use the checkrclink command from the 3PAR CLI.
- B. Check the relink statistics reported in InfoSight
- C. Ask the network administrator to check the latency
- D. Use the relink status check from the 3PAR SSMC
Answer: A
NEW QUESTION 73
Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.
A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer's environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.
What should you add the BOM to meet the customer needs?
- A. one HPE 25m Mini SAS High Density Active Optical Cable for each HPE 3PAR 8440
- B. one HPE 3PAR StoreServ 8000 Direct Connect Cabling Option for Drive Enclosure for each HPE 3PAR 8440
- C. one HPE SN3000B SAN Switch 12-port Upgrade E-LTU per switch, appropriate number of SFPs and
- D. one HPR 3PAR StoreServ AC RPS Service Processor
Answer: C
Explanation:
cables
NEW QUESTION 74
A customer wants to replace an EMC storage array. You want to provide as much Information about the EMC configuration as possible to propose an HPE 3PAR or HPE Nimble Storage array.
Which HPE tool will meet your needs?
- A. HPE Ninja Stars for 3PAR
- B. HPE Storage Sizer
- C. HPE SAF-Collect
- D. HPE NinjaPiotecled-
Answer: C
NEW QUESTION 75
A customer is monitoring an existing HPE 3PAR array, which is doing synchronous replication to a remote site. The customer notices that controller utilization regularly exceeds 60% on all nodes. An HPE 3AR OS upgrade to 3.3.1 MU2 is planned in the near future to support compression on the array.
What should you inform the customer before performing the upgrade?
- A. Performance cannot he guaranteed during the upgrade.
- B. Enabling compression requires SED capable SSDs In the array.
- C. Enabling compression requires a backup and restore of all data
- D. Performing the upgrade will need to be done in the offline mode
Answer: A
NEW QUESTION 76
A customer needs lo replace an existing Dell EMC backup-to-disk solution with an HPE solution to integrate with an HPE 3PAR solution.
Which toot should you use lo begin your assessment of the customer environment?
- A. HPE inToSight
- B. Ninja Crawler
- C. DD Analyzer
- D. SAF Analyse
Answer: D
NEW QUESTION 77
A customer wants an HPE 3PAR array with about 400,000 IOPS and over 6000 MBs per second through - put at 16K block size. What should you consider in your design?
- A. Focus the configuration on the effective capacity ratio rather than data reduction ratio
- B. Ensure that the write IO service time on the array is under 2ms
- C. Adhere to the initiators per port, initiators per system, and fan-in/fan-out limits in SPOCK
- D. Configure the HA-enclosure to protect against enclosure failure
Answer: A
NEW QUESTION 78
You are presenting a Remote Copy solution to a customer that expects to experience significant future growth During your presentation, the customer expresses concerns about future integrations of HPE 3PAR arrays into the replication solution.
How should you respond to address the customer concern?
- A. Asynchronous Streaming replication is available on all generations of HPE 3PAR arrays.
- B. HPE 3PAR 8000 arrays can only replicate to other HPE 3PAR 8000 and HPE 3PAR 7000 arrays.
- C. Only HPE 3PAR 20000 arrays can be a replication target for 8000. 9000, and 20000 arrays.
- D. All current and previous generation HPE 3PAR arrays can replicate data between each other
Answer: D
NEW QUESTION 79
A customer must replicate data between two main data centers while maintaining a copy of the data at a third site The current storage solution from another vendor can only replicate the data between two sites. The customer acquired a third data center, but bandwidth between the two main data centers and the third site is limited. Automatic transparent failover is only required between the two main data centers
You propose a solution consisting of three HPE 3PAR storage arrays and the 3DC Peer Persistence feature.
What should you emphasize during your presentation?
- A. Replication to the third site is synchronous and deduplicated. increasing the effective bandwidth available.
- B. Replication to the third site is asynchronous periodic, having the lowest bandwidth requirements
- C. Replication to the third site is synchronous and compressed, maximizing bandwidth efficiency
- D. Replication to the third site is asynchronous streaming, having the lowest latency requirements.
Answer: B
NEW QUESTION 80
A customer needs to replace their outdated storage arrays.
Which resource provides the necessary information to properly size a solution?
- A. HPE Storage Sizer
- B. HPE NinjaCrawler
- C. HPE Ninja Stars for Nimble
- D. HPE Storage Assessment Foundry
Answer: D
NEW QUESTION 81
A customer has an HPE Nimble Storage array. They plan to add a second HPE Nimble Storage array to their existing group.
What is the expected write behavior to a volume once the new array is added to the same pool as the existing array?
- A. Data will continue to write to the first array until there is 40% free space available, and then alternate writes between the two arrays
- B. Data will immediately start to alternate writes between the two arrays
- C. Data will be stripped and automatically re-balanced across the two arrays
- D. Data will be written to the new array until it is the same percent full as the original array
Answer: D
NEW QUESTION 82
A customer has two HPE SPAR arrays with synchronous replication configured.
I he customer established a new location less than 10 km away that will he used for disaster recovery. The data at the disaster location does not need to be as currant as the data at the primary location. The link between the two locations is not reliable during the daytime due to snared bandwidth
which replication should you recommend to meet this customer's needs?
- A. Asynchronous Periodic
- B. Synchronous
- C. Asynchronous Streaming
- D. 3DC Peer Persistence
Answer: A
NEW QUESTION 83
Refer to the exhibit.
A customer requests a quote for an HPE 3PAR 9450 array. The customer will provision a single CPG using RAID 6 (6+2) arx1 require cage availability
What must De changed in the Bin of Materials shown to meet this requirement?
- A. Add an additional HPE 3PAR StoreServ File Controller v3 System
- B. Add A HPE 3PAR 9000 24-disk 2U SFF (2 Sin) SAS Delve Enclosures.
- C. Change From Direct Connect to Daisy-chain cabling
- D. Remove 2 HPE 3PAR 9000 2-port to GD Ethernet Host Pus Adapters.
Answer: A
NEW QUESTION 84
A customer attempts to test HPE 3PAR Peer Persistence automated failover by disconnecting the Quorum Witness (QW) link at the source 3PAR. then disconnecting the Remote Copy <RC) link at the source 3PAR one minute later However, failover does not occur
What should you do differently to test Peer Persistence automated failover?
- A. The RC links should be disconnected from both arrays more than 1 minute apart
- B. The QW and RC links should be disabled at the source array within 10 seconds of each other
- C. The RC links should be disconnected from both arrays within 10 seconds or each other.
- D. The QW and RC links should be disabled at the source array more than 1 minute apart
Answer: C
NEW QUESTION 85
A customer has a Tier 1 application that has high bandwidth and is sensitive to latency.
The customer needs a solution to support this application. The solution must support replication between two sites over dark fiber links and support an RPO of zero.
Which solution meets the customer requirements?
- A. dual HPE 3PAR 8400 arrays with data replicated using iSCSI
- B. dual Nimble HF20 arrays with data replicated over iSCSI
- C. dual HPE 3PAR 9450 arrays with data replicated using RCFC
- D. dual Nimble AF40 arrays with data replicated over FC
Answer: A
NEW QUESTION 86
A customer has standardized on windows Server for the company's physical server applications. The customer must ensure that applications and storage will move between sites as one during automated or manual failover
Which HPE 3PAR integrated solution should you recommend as a preventative measure?
- A. Peer Persistence
- B. Site Recovery Manager
- C. Service guard Metrocluster
- D. Cluster Extension (CLX)
Answer: D
NEW QUESTION 87
A customer needs to upgrade their existing HPE 3PAR environment. They ask you to present a solution to gather data from all 200 of their HPE 3PARs arrays, which are spread across the globe. The arrays consist of various generations and OS levels, and they are managed by regional instances of SSMC. What should you present to the customer as a solution?
- A. using the SSMC array configuration reports
- B. using an HPE 3PAR CLI script with the checkupgrade command
- C. using a script based on the HPE 3PAR Web Services API
- D. using the upgrade report tool in HPE InfoSight
Answer: A
Explanation:
Explanation/Reference: https://support.hpe.com/hpsc/doc/public/display?docId=c05243943
NEW QUESTION 88
......
New HPE0-J58 Dumps - Real HP Exam Questions: https://actualtests.troytecdumps.com/HPE0-J58-troytec-exam-dumps.html